Energy Transformation Systems, Inc. (ETS) is the pioneer... Cart Contact
1 2 3 4 5

Audio Products

Got Cable? Every balun, hub or adapter needs CABLE... Click here to order
Analog Audio adapters, Digital Audio Baluns and Splitters, and specialty Audio products.


InstaSnake™ PA200 Series InstaSnake™ PA200 Series   Video   PDF
Audio Adapters

  The ETS InstaSnake™ Series (PA200) is a compact, lightweight, versatile passive group of components allowing you to run audio signals over a single run of Cat 5, 5e, 6 or 6a data cables. With a roll of cable, these compact units are easily transported and/or stored solving dozens of live and/or recording sound problems.

  The InstaSnake™ is a passive unit, so you do not need power. The InstaSnake™ accepts "mic" level or line level analog or digital audio and supports phantom power when using shielded Cat 5 or 6 cables. The basic units are a pair of passive units with bi-directional capability which can be input directly into analog or digital consoles.

  Designed to the highest professional standards the InstaSnake™ has a wide, flat frequency response, low THD and residual noise. The InstaSnake™ has been factory tested to 1900 feet over Cat 5 using balanced line low impedance dynamic microphones. Phantom power has been tested to 850 feet over shielded cable. (Phantom Power - Shielded Cat 5 or 6 cables are required to pass phantom power ...

Info Part# Price Purchase
(4) FXLR 1.50' pigtail to RJ45 jack, all pinsIMG PA202FP $218.85
(4) MXLR 1.50' pigtail to RJ45 jack, all pinsIMG PA202P $218.85
(4) FXLR or MXLR to RJ45 jack, all pinsIMG PA202x $188.95
(3) FXLR + (1) MXLR 1.50' pigtail to RJ45 jack, all pinsIMG PA203FP $218.85
(3) MXLR + (1) FXLR 1.50' pigtail to RJ45 jack, all pinsIMG PA203P $198.95
(3) FXLR or MXLR + (1) MXLR or FXLR to RJ45 jack, all pinsIMG PA203x $188.95
(2) FXLR+ (2) MXLR 1.50' pigtail to RJ45 jack, all pinsIMG PA204FP $198.95
(2) MXLR + (2) FXLR 1.50' pigtail to RJ45, all pinsIMG PA204P $218.85
(2) FXLR + (2) MXLR or (2) MXLR + (2) FXLR to RJ45 jack, all pinIMG PA204x $188.95
Splitter - (4) MXLR to (2) RJ45 jacks, all pinsIMG PA206 $190.85
go to top


InstaSnake PA200™ Series InstaSnake PA200™ Series     PDF
Audio Adapters – Wall Plates

  The ETS InstaSnake wall plate has been designed
with the option of 110 punch-down block or shielded
RJ45 jack on the circuit board allowing the installer ease
of use.
  The InstaSnake wall plate is a passive unit; you do not
need power. It accepts “mic” level, line level, analog or
digital audio signals and supports phantom power when
using shielded Cat5e or 6 cables. The basic units are a
pair of passive units with bi-directional capability which
can be input directly into analog or digital consoles.
  Designed to the highest professional standards, the
InstaSnake wall plate has a wide flat frequency
response, low THD and residual noise. It has been
factory tested to 1900 feet over Cat5 using balanced line
low impedance dynamic microphones. Phantom power
has been tested to 850 feet over shielded cables.
(Shielded UTP cables are required to pass phantom
power).
  These wall plates are compatible with the Clear COM
products.

Info Part# Price Purchase
Brushed Steel wall plate, (4) XLR to shielded RJ45 jack PA202xRJWP $171.00
Brushed Steel wall plate, (4) XLR to 110 punch-down block PA202xWP $171.00
Brushed Steel wall plate, (3) FXLR + (1) MXLR to 110 punchdown block PA203FWP $171.00
Brushed Steel wall plate, (3) MXLR + (1) FXLR to 110 punchdown block PA203MWP $171.00
go to top


InstaSnake PA210 Series InstaSnake PA210 Series   Video   PDF
Audio Adapter for CINESNAKE™

      The ETS CINESNAKE™ Series PA210 is a compact, lightweight, versatile passive group of components allowing you to run audio signals over a single run of CAT5 or better cables. With a roll of wire, these compact units are easily transported and/or stored solving dozens of live and/or recording sound problems.

    The CINESNAKE™ is a passive unit, so you do not need power. The CINESNAKE™ accepts "mic" level, line level, analog or digital audio and supports phantom power when the slide switch is "ON"  position.

  One cable carries both audio signals simplifying the user or installer's job. Ordinary UTP cabling may be used, however distance and quality are enhanced with cat5 or better cable.

Note:  The CineSnake fits the following cameras:
Canon - C100, C300, C500, XA-10, XA-20, XA-25, XA-100, XA105
Sony - Sony XF5-300, XF305
Panasonic - AG HPX 250P

Info Part# Price Purchase
Set of (1) PA212 + (1) PA213 PA211 $249.99
(2) channels, (2) FXLR + slide switch to EtherCon RJ45 jack PA212 $124.99
(2) channels, (2) MXLR toEtherCon RJ45 jack PA213 $124.99
go to top


PA700 Series Analog Audio Distribution Hub PA700 Series Analog Audio Distribution Hub     PDF
UTP Audio Stereo Distribution Hub, 8 Channel

The Cat5 Audio Broadcast System from ETS, the PA700 UTP Analog Audio Distribution Hub (pictured above) has two channels of line-level audio transmitted through the distribution amplifier, creating 8 output sets (stereo audio) from a single source.
  The powered PA700 can be cascaded twice (three tiers), yielding a total distribution of 512 receivers from a single input source.
  Audio signals are converted to and from UTP using the standard ETS PA807 Analog Audio Balun.
  The PA700 System supports stereo audio over a total run length exceeding 100 meters (inclusive of all cable segments) on Category 5 or better cable.

$452.00  item# PA700 go to top


PA800 Series PA800 Series     PDF
Analog Audio Adapter

  The ETS PA800 Series of Analog Audio Adapters is ideal for use in applications requiring audio signals to be sent over distances greater than 4 meters. Signals may be sent in either direction.  By balancing and isolating signals, the audio signals can be safely sent over 100 meters.

  The PA807 Stereo Audio Adapter and the PA808 Dual Stereo Audio Adapter is housed in a standard middle-size case. The PA807 or PA808 gives the capability of sending 2 or 4 audio signals down a single run of UTP (utilizing 2 or 4 pairs), without using a "hydra" assembly.  Additionally, the PA808 enables bi-directional stereo audio to pass over a single UTP run.

  The PA807PT Analog Audio Adapter is a 2 channel adapter with a pass through that allows the installer to connect the unused pairs for data or other connections as needed.

Info Part# Price Purchase
Analog Audio, RCA to RJ45, pins 4, 5 PA800 $36.86
Analog Audio, RCA to RJ45, pins 1, 2 PA801 $37.95
Analog Audio, RCA to RJ45, pins 3, 6 PA802 $37.95
Analog Audio, RCA to RJ45, pins 7, 8 PA803 $37.95
Analog Audio, MBNC to screw terminals PA804 $38.70
Analog Audio, FBNC to 6" pigtail MXLR PA805 $60.25
Analog Audio, FBNC to 6" pigtail, FXLR PA806 $60.25
Analog Audio, (2) RCA to RJ45, pins 1, 2 & 3,6 PA807 $72.25
Analog Audio + Pass Through, (2) RCA jacks + (1) 4 position term PA807PT $88.50
Analog Audio, (4) RCA to RJ45, all pairs used PA808 $120.50
go to top


PA800WP Series PA800WP Series     PDF
Analog Audio Adapter Wall Plates

  The ETS PA800WP Series of Analog Audio Adapters has been designed with a new flat circuit board and decorator wall plate, yielding neat, highly professional installations by complementing existing wall plates. For ease of use, all ports are pre-labeled.

  The PA807WP and PA808WP are ideal for use in applications requiring audio signals to be sent over distances greater than 4 meters. Signals may be sent in either direction. By balancing and isolating, the audio signal can be safely sent over 100 meters.

    The PA807WP or PA808WP enable sending 2 or 4 audio signals down a single run of UTP (utilizing 2 or 4 pairs), without having to use a "hydra" assembly. Additionally, the PA808WP enables sending bi-directional stereo audio over a single UTP run.

Info Part# Price Purchase
Analog Audio,(2) RCA jacks to 110 punch down PA807WP-X $79.25
Analog Audio,(4) RCA jacks to 110 punch down PA808WP-X $132.50
go to top


PA809 Audio Isolator PA809 Audio Isolator   Video   PDF
Analog Audio Isolator - RCA jack to RCA jack

  Ground loops occur when multiple audio elements are connected to different outlets. Hum and "noise" in the audio signal are usually the result of ground loops in the system.

  The ETS PA809 solves this common audio problem of extraneous noise. Installing the PA809 Analog Audio Isolator between the source and the receiver eliminates hum, vastly improving the listening experience.

  The PA809 is conveniently equipped with RCA "pin-plug"-style female jacks at both input and output sides.

Installing the PA809 is a ten-second operation: simply plug it in. No battery and no further maintenance are ever needed.

$44.00  item# PA809 go to top


PA810 Series PA810 Series     PDF
Digital Audio Baluns & Balun Panels

  ETS, long a leader in baluns for computer networks, applies our expertise in Balanced Line™ technology to the XLR to BNC Digital Audio Baluns (DAB) and DAB Panels. The PA810 Series of baluns and balun panels from ETS is designed to connect AES/EBU signals from XLR output equipment into standard 75ohm coax cabling systems. These baluns perform precise impedance- matching and signal balancing, enabling AES/EBU signals to be transmitted with greater signal integrity and longer runs over coaxial cable than can be achieved with STP wiring. Isolated versions are available for VDA and router applications.

  Other members of this family are the PA818-X Digital Audio Panels which incorporates all of the functionality of ETS baluns in a convenient, 8-channel, single-rack height unit. Isolated outputs and monitor ports for each channel are standard.
  The PA819 "Re-Balancer" balances signals into a true balanced-line performance.

Info Part# Price Purchase
AES/EBU Balun, FBNC to MXLR PA810 $60.00
AES/EBU Balun, FBNC to FXLR PA811 $60.00
AES/EBU Balun, FBNC to MXLR, 10dB [atten 1Vp-p] PA812 $75.50
AES/EBU Balun, FBNC to FXLR, 10dB [atten 1Vp-p] PA813 $75.50
AES/EBU Panel, (8) FXLR to FBNC, PAD to 1 VP-P PA818F $773.00
AES/EBU Panel, (8) FXLR to FBNC, No PAD PA818FN $651.00
AES/EBU Panel, (8): (4) as -F, (4) as -M PA818H $712.00
AES/EBU Panel, (8): (4) as -FN, (4) as -M PA818HN $651.00
AES/EBU Panel, (8) MXLR to FBNC PA818M $651.00
go to top


PA819 PA819     PDF
Analog or Digital Audio Rebalancer

  ETS, long a leader in baluns for computer networks, applies our expertise in Balanced Line technology to the Analog/Digital Audio Rebalancer™ (PA819).
  If you have trouble with hum, buzz or a higher than normal noise floor, this could be due to twisted pairs which are unbalanced or even "slightly" unbalanced. Plug in a Rebalancer (PA819) and many of these problems disappear.
  A badly balanced input signal emerges from the other side as a dramatically improved balanced signal, improved common mode rejection, lower noise and lower EMI/RFI.
  Many classic old devices (limiters, compressors etc.) have poorly balanced inputs or outputs. A Rebalancer solves most noise problems.
  The Rebalancer passes digital audio signals. Although digital devices are much less prone to noise problems, usually not heard, it messes up the clock recovery and conversion of the digital signal back to analog.
  The Rebalancer (PA819) balances signals into a true balanced-line performance. It provides a flat response and will pass phantom power.

$61.00  item# PA819 go to top


PA820, PA778x Series PA820, PA778x Series   Video   PDF
RG59 Splitter and Panels

  The ETS PA820 RG59 Splitter and the PA778x Series of AES/EBU Splitter Panels are carefully designed to divide the energy from a single source into equal parts, maintaining precise impedance-matching. Return signals are routed back to the source with minimal crosstalk to the other port.

  These devices are expressly crafted for AES/EBU standard for digital audio. They minimize losses while preserving signal integrity. As an added benefit, ETS precision impedance-matching technology enables units to be non-symmetrically applied when being cascaded. Note that each cascade stage reduces the signal level by 3dB.

Info Part# Price Purchase
RG59 Splitter Panel, 12 channels PA778-12 $918.00
RG59 Splitter Panel, 4 channels PA778-4 $561.00
RG59 Splitter Panel, 8 channels PA778-8 $740.00
RG59 Splitter, (1) FBNC in, (2) FBNC out PA820 $68.50
go to top


PA830 Series PA830 Series   Video   PDF
AES/EBU Digital Audio Splitters, Panels

  The ETS PA830 Series are the Balanced Line™ Digital Audio Splitters and Digital Audio Splitter Panels. These products are expressly designed for the digital audio market. Used only for balanced 110ohm signals, these units accommodate signal levels to 10V. Since proper impedance is maintained, the splitters do not have to be symmetrically applied.

  Due to careful specification and minimal signal modification, units may be cascaded, thereby reducing transmitted signal power by 3dB at each stage.

  Also available is the PA835 panel-mounted splitter in a 4-channel version.

Info Part# Price Purchase
AES/EBU Splitter, F-XLR to (2) M-XLR PA830 $95.95
AES/EBU Splitter, M-XLR to (2) F-XLR PA832 $95.95
AES/EBU Splitter Panel, 4 channels of PA830, 1RU PA835 $407.00
go to top


PA840 Series PA840 Series     PDF
Isolated Digital Audio Baluns

  ETS  Isolated Digital Audio Baluns offer screw terminal connections. From Southeast Asia to Madison Square Garden, these AES/EBU-compliant products are hard at work converting digital audio signals from Shielded Twisted Pair (STP) cable to coax. Used for temporary setups, as well as permanently, in locations where coax is already present, and economical than pulling fresh STP - the PA840 and PA841 baluns deliver proven solutions.

  These baluns perform precise impedance-matching and signal-balancing, enabling AES/EBU signals to be sent with greater signal integrity and longer runs over coaxial cable than can be achieved with STP wiring. The signal isolation enables VDA and router applications.

Info Part# Price Purchase
AES/EBU Balun, Isolated, F-BNC to (3) Screw Term. PA840 $73.00
AES/EBU Balun, Isolated, F-BNC to (2) Screw Term. PA841 $73.00
go to top


PA850 Series PA850 Series     PDF
Digital Audio Adapter

  The ETS Digital Audio Adapter (PA850 Series) is impedance- matched, balanced, and isolated to provide excellent performance sending AES/EBU signals over Category 5 or better Unshielded Twisted Pair (UTP) wiring.

  Experiments with High Performance Category5 cable have shown that Digital Audio signal performance over UTP is equal to that of 110-ohm Shielded Twisted Pair wire, even at the highest bit rates.

  The ETS exclusive balun design balances and isolates the signal, eliminating unwanted jitter. The careful impedance-matching prevents reflections that can degrade signal reception and decoding.

Info Part# Price Purchase
Digital Audio Adapter, M-XLR to RJ45 Jack PA850 $74.00
Digital Audio Adapter, F-XLR to RJ45 Jack PA851 $74.00
go to top


PA870 Series PA870 Series     PDF
Balanced Analog Audio Adapter

  The ETS PA870 Series of Balanced Analog Audio Adapters is ideal for use in applications requiring audio signals to be sent over distances greater than 4 meters. Signals may be sent in either direction. By balancing the audio signal as well as isolating it, signals can be easily sent over 100 meters distance.

  The PA872 Stereo Balanced Audio Adapter and the PA874 Dual Balanced Stereo Audio Adapter enable sending 2 or 4 audio signals down a single run of UTP (utilizing 2 or 4 pairs) without having to use a "hydra" assembly. Additionally, the PA874 allows sending bi-directional stereo audio over a single UTP run.

Info Part# Price Purchase
Balanced Analog Audio, screw term. to RJ45, pins 5, 4 PA871 $53.50
Balanced Analog Audio, Stereo, Screw terminal to RJ45 PA872 $92.50
Balanced Analog Audio, Dual Stereo, Screw terminal to RJ45 PA874 $164.50
Balanced Analog Audio, 6" pigtail MXLR to RJ45, pins 5,4 PA875 $61.50
Balanced Analog Audio, 6" pigtail FXLR to RJ45, pins 5,4 PA876 $61.50
go to top


PA881, PA884 & PA885 PA881, PA884 & PA885     PDF
S/PDIF Digital Audio Baluns

  The ETS S/PDIF-compliant products convert digital audio signals from Unshielded Twisted Pair (UTP) cable to coax. Used for temporary setups, as well as in permanent locations where coax is already in place, it's less costly than pulling fresh UTP. The PA881 and PA884 baluns provide viable and dependable solutions.

  These baluns perform precise impedance- matching and signal balancing, enabling S/PDIP signals to be transmitted with greater signal integrity and longer runs over coaxial cable than can be achieved with UTP wiring.

  Note: Consumers with digital equipment in the home such as CD players, DVD players, receivers, etc. with digital inputs/outputs should use PA881. PA884 is designed for professional applications.

Info Part# Price Purchase
SPDIF Balun, RCA jack to RJ45 jack, pins 5, 4 PA881 $29.85
SPDIF Balun, RCA plug to screw terminal PA881S $29.85
SPDIF Balun, FBNC to RJ45 jack, pins 5,4 PA884 $29.85
SPDIF Balun, RCA plug to RJ45, pins 1, 2 PA885 $29.85
go to top


PA882, PA883, PA886 Series PA882, PA883, PA886 Series     PDF
SPDIF Digital Audio Baluns

  ETS, long a leader in baluns for computer networks, applies that expertise in Balanced Line™ technology to the XLR to BNC Digital Audio Baluns (DAB) and DAB Panels.

  The PA882, PA883 and PA886 baluns from ETS are designed to connect SPDIF signals from XLR output equipment into standard 75Ohm coax cabling systems.

  These baluns perform precise impedance-matching and signal balancing; allowing SPDIF signals to be transmitted with greater signal integrity and longer runs over coaxial cable than can be achieved with STP wiring.

Info Part# Price Purchase
SPDIF Balun, RCA jack to M-XLR w/20dB attenuation PA882 $75.50
SPDIF Balun, RCA jack to F-XLR PA883 $60.75
SPDIF Balun, RCA jack to M-XLR PA886 $60.75
go to top


PA900 Series PA900 Series     PDF
Digital Audio (Time Code) Baluns

  ETS, long a leader in baluns for computer networks, applies that expertise in Balanced Line™ technology to the XLR to UTP Digital Audio Baluns (DAB) and DAB Panels.

  The PA900 series of baluns from ETS is designed to connect Time Code signals from XLR output equipment to standard 75Ohm coax or 100Ohm UTP cabling systems. The baluns perform precise impedance-matching and signal balancing, enabling Time Code signals to be transmitted with greater signal integrity and longer runs over coaxial or UTP cable than can be achieved with conventional STP wiring.

Info Part# Price Purchase
Time Code, 75Ohm F-BNC to M-XLR PA900 $70.00
Time Code, 75Ohm F-BNC to F-XLR PA901 $70.00
Time Code, M-BNC to M-XLR PA902 $70.00
Time Code, M-BNC to F-XLR PA903 $70.00
Time Code, RJ45 jack pin 5,4 to 1ft M-XLR PA904 $70.00
Time Code, RJ45 jack pin 5,4 to 1ft F-XLR PA905 $70.00
go to top


PA910 Series PA910 Series   Video   PDF
DSLR Audio Camera Baluns™

Long a leader in computer network baluns, ETS now applies that expertise in Balanced Line™ technology to the new DSLR Audio Camera Balun™ linking a female XLR connector to a 3.5mm mini-plug for input to the camera's audio port.

  The PA910 Series of DSLR Audio Camera Baluns™ from ETS is designed to connect the DSLR camera's internal audio to professional-grade microphones or other signal sources.

  The compact, passive device preserves balanced lines, enabling full noise reduction for runs up to 2000 feet of microphone cable!
 

NOTE:
The PA910 Series of DSLR Audio Camera Baluns™ are not designed with phantom power, but easily work with condenser microphones equipped with separate power supplies (or batteries).

Info Part# Price Purchase
Mono DSLR Audio Camera Balun, 3.5mm mini plug 18" long to FXL PA911 $72.00
Two Channel DSLR Audio Camera Balun, 3.5mm mini plug 18" long PA912 $102.50
go to top


PA920 Series PA920 Series   Video   PDF
iProAudio™ Balun

  ETS applies its Balanced Line technology to the iProAudio™ Balun mating a professional-grade XLR-style connector with a 3.5mm TRRS plug that plugs into the smartphone's or iPad's audio input jack, allowing software on the smartphone to record professional quality audio. The iProAudio Baluns are compatible with phones using the CTIA/AHJ* standard wiring.
    By plugging the iProAudio Balun (PA921 or PA922) into the digital audio "record" function of the smartphone, one can use a high-end professional XLR-style microphone for recording.
    The balun converts the unbalanced 3.5mm plug to a true balanced low-impedance XLR input that allows the addition of much longer cables, more than 500 feet (150m) on common microphone cable. Using a single channel InstaSnake and unshielded Cat5e, signals can be sent up to 1,000 feet. (300 m)
  The PA921 with an 18-inch flat pigtail is for recording only. To listen to the playback, remove the PA921.
  The PA922, similar to the PA921 has an additional 3.5mm jack on a 6-inch pigtail with an audio plug which provides a source  ...

Info Part# Price Purchase
iProAudio™ Balun, 3.5mm TRRS mini-plug with 18" tangle-free flat cable to FXLR. PA921 $51.00
iProAudio™ Balun, 3.5mm TRRS mini-plug with 18" tangle-free flat cable + 3.5mm jack with 6" pigtail to FXLR PA922 $72.00
go to top


Close
Web City Pages